AFT102 Heat Exchanger Supply Unit Thermal Lab Equipment Educational Equipment Vocational Training EquipmentI.Product Overview
1.1 Product Description
Heat exchangers transfer thermal energy from one medium flow to another. The two fluids are not in direct contact. Efficient heat transfer is a prerequisite for economical processes. Therefore, different types of heat exchangers are used in practice depending on the requirements.
This experimental setup can be used to investigate and compare different heat exchanger designs.
The heat exchanger to be investigated is connected to a supply unit. Hot water flows through the heat exchanger. Part of the thermal energy of the hot water is transferred to the cold water. Reversing the water connection changes the flow direction, allowing parallel or countercurrent operation.
1.2 Product Features
(1) Safer. The product fully considers the user's safety at the beginning of the design, and adopts an excellent electrical layout and grounding reliability solution.
(2) Easier to use. The product adopts a modular design. Both the electrical structure and the mechanical structure use modular design. The structure and principle are clear and can be more convenient for users to use.
(3) More beautiful. The product adopts an integrated design. The equipment is small and beautiful, and still has very rich functions. Due to the integrated design, the equipment has extremely low environmental requirements.
(4) More durable. The product uses more solid and corrosion-resistant materials, which can greatly extend the service life of the equipment.
II.Performance Parameter
2.1 Technical Parameters
Power supply parameters: single-phase AC230V, 60Hz
Pump:
Power consumption: 120W
Maximum flow: 600L/h
Maximum head: 30m
Heater:
Power output: 3kW
Thermostat: 0…70°C
Hot water tank: about 10L
Measuring range:
Temperature: 6x 0…100°C
Flow: 2x 20…250L/h
2.2 Dimension and Weight
Dimension: 1000mm×655mm×510mm
Weight: <100kg
III.Product component names and function introduction
3.1 Product Main Part
|
No.
|
Name
|
|
1
|
Water tank drain port
|
|
2
|
Cold water inlet
|
|
3
|
Cold water outlet
|
|
4
|
Water tank
|
|
5
|
Hot water outlet pipe
|
|
6
|
Hot water return pipe
|
|
7
|
Cold water outlet pipe
|
|
8
|
Cold water return pipe
|
|
9
|
Touch screen
|
|
10
|
Power switch
|
|
11
|
Temperature sensor cable interface
|
|
12
|
Stirring motor interface
|
|
13
|
RFID card reader
|
|
14
|
USB interface
|
|
15
|
Power interface
|
|
16
|
Float switch
|
|
17
|
Temperature sensor
|
|
18
|
Heating rod
|
3.2 Product Main Part 2
|
No.
|
Name
|
|
1
|
Hot water inlet (inner pipe)
|
|
2
|
Hot water outlet (inner pipe)
|
|
3
|
Cold water inlet (outer pipe)
|
|
4
|
Cold water outlet (outer pipe)
|
|
5
|
Junction box
|
|
6
|
Hot water circuit thermal resistor
|
|
7
|
Cold water circuit thermal resistor
|
3.3 Product Accessories
|
No.
|
Name
|
|
1
|
USB cable, blue, 1.5m at both ends
|
|
2
|
European power cord
|
|
3
|
USB flash drive
|
|
4
|
Stirring motor plug
|
|
5
|
Fuse 15A 5*20
|
|
6
|
RFID card
|
|
7
|
Pipeline locking buckle
|
IV.Product Configuration List
|
No.
|
Name
|
Quantity
|
|
1
|
Heat Exchanger Supply Unit
|
1
|
|
2
|
Tube heat exchanger
|
1
|
|
3
|
USB cable, blue, 1.5 meters at both ends
|
1
|
|
4
|
European power cord
|
1
|
|
5
|
USB flash drive
|
1
|
|
6
|
Stirring motor plug
|
1
|
|
7
|
Fuse 15A 5*20
|
5
|
|
8
|
RFID card
|
3
|
V.Experiment list
Experiment 1 Introduction to basic software functions
Experiment 2 Heat exchanger supply unit experiment
