AFR023 Wind Power Generator Trainer Educational Equipment Technical Skills Training Renewable Training System 1. Product Introduction 1.1 Product Description The training equipment consists of six major unit systems: power generation unit, charging unit, energy storage unit, inverter module, control unit, and load unit. Be familiar with the basic knowledge of wind power generation and the understanding and analysis of installation, commissioning, operation, maintenance, fault analysis, and fault diagnosis, master its principles and control methods, and cultivate students' corresponding knowledge and skills. It is suitable for teaching and skill training assessment of relevant majors in higher vocational colleges, general colleges, secondary vocational schools, and technical schools. 1.2 Product Features 1. The training device adopts an aluminum profile column frame structure, which is simple and elegant as a whole. The bottom is equipped with universal wheels, and the height can be adjusted separately according to the ground conditions. The outer surface adopts 1.5mm thick painted iron plate, which has a firm structure and is simple and elegant as a whole. 2. The wind speed is adjustable, the configuration is complete, and it is easy to use. 3. The training equipment has a good safety protection system. 2. Technical Specifications 2.1 Technical Parameters Input power: AC single-phase 220V, 50Hz, British plug Working conditions: ambient temperature -10℃～+40℃ relative humidity <85% (25℃) DC voltmeter: 30A DC ammeter: 5A AC voltmeter: 30A AC ammeter: 1A Inverter: Input: DC12V Output: AC220V, 50HZ Actual power: 500W Peak: 1000W Incandescent lamp: 220V 40W Wind generator: three-phase AC12V, 300W, with 3 blades, starting wind speed 2m/s, rated wind speed 12m/s, impeller diameter 1.35m Wind turbine controller: three-phase AC12V, 300W, rectifier output: DC12V Battery: 12V/38AH Inverter: input single-phase 220V, output three-phase 380V, 1.5KW LED bulb: 12v, 12W 2.2 Dimensions and weight Dimensions:2130mm*2080mm*2020 Weight:517kg 3. Product component 3.1 Product main part No. Name 1 Control panel 2 Schematic diagram 3 Porthole 4 Steering wheel 5 Wind turbine 6 12V battery 7 Axial fan 8 Protective net 3.2 Product electrical part No. Name 1 Bulb (HL1, HL2) 2 Tungsten filament bulb (HL3, HL4) 3 Toggle switch (SB1, SB2, SB3, SB4) 4 Inverter 5 Voltmeter (V1) 6 Voltmeter (V2) 7 Voltmeter (V3) 8 Voltmeter (V4) 9 Ammeter (A1) 10 Ammeter (A2) 11 Inverter 12 Wind-solar hybrid controller 13 Indicator 14 Emergency stop knob 15 Circuit breaker 16 Circuit breaker (QF1) 17 Circuit breaker (QF2) 3.3 Product accessories No. Name 1 12V smart charger 4. Product Configuration List No. Name Quantity 1 Bulb (HL1, HL2) 2 2 Tungsten filament bulb (HL3, HL4) 2 3 Toggle switch (SB1, SB2, SB3, SB4) 4 4 Inverter 1 5 Voltmeter (V1) 1 6 Voltmeter (V2) 1 7 Voltmeter (V3) 1 8 Voltmeter (V4) 1 9 Ammeter (A1) 1 10 Ammeter (A2) 1 11 Inverter 1 12 Wind-solar hybrid controller 1 13 Indicator 1 14 Emergency stop knob 1 15 Circuit breaker 1 16 Circuit breaker (QF1, QF2) 2 18 12V smart charger 1 20 Schematic diagram 1 21 Porthole 1 22 Wind turbine 1 23 12V battery 1 24 Axial fan 1 25 Protective screen 1 5. Product teaching experiment list (1) Battery discharge experiment (2) Battery inverter experiment (3) Battery charging experiment (4) Emergency protection measures experiment (5) Wind turbine overload protection experiment (6) Wind power generation experiment (7) Smart charger charging experiment
